Looking for Burbank Electric Gate Repair? A gate that opens but will not close is almost always a safety sensor doing exactly what it was designed to do. We serve Burbank and the surrounding neighborhoods.
A gate that opens but will not close is almost always a safety sensor doing exactly what it was designed to do.
We test power, sensors, controls and the gate itself before quoting a part, because guessing at an operator is expensive.
If the gate binds by hand, no work on the motor will fix it. That check comes first on every callout.
A gate that opens but will not close is the classic photo eye fault: a dirty lens or a knocked bracket.
The system is behaving exactly as designed with the information it has. Cleaning and realigning fixes most of them.
Boards, transformers, receivers and batteries all fail, and battery backup can mask a mains fault for days.
That delay is why the cause so often looks unrelated to anything that actually happened.
If the gate is heavy or binding by hand, the fault is mechanical and no work on the motor will fix it.
An operator fighting a binding gate runs hot and usually takes its board with it.
Automatic gates around Burbank combine a physical gate with mechanical and electrical equipment. When one stops working the problem is not necessarily the gate itself — it may be the operator, motor, controls, sensors, remotes, safety equipment or wiring.
We service gates for apartment buildings, businesses and parking areas across Burbank, where a gate that fails is a problem the same morning.
From a walk gate that no longer latches to a large automatic entrance, we repair gates on Burbank homes and multifamily property alike.
Wood gates split, warp and loosen in the Los Angeles County sun. Metal gates develop alignment problems, damaged hardware or failures at welded joints.
Safety sensors, keypads, remotes, receivers and intercoms all have to agree with each other. We troubleshoot the complete system rather than swapping parts.
The operator opens and closes an automated gate. On a busy Burbank driveway that is hundreds of cycles a month, and they eventually develop mechanical or electrical problems.
Photo eyes in Burbank collect dust, cobwebs and sprinkler spray, and a dirty lens stops a gate as effectively as a failed board.
Battery backup also masks a power fault for days, which is why the cause often looks unrelated to anything that happened.
You get a written price before any work begins, and we tell you plainly if replacement is the better value.
Power, sensors, controls, then the gate itself.
We tell you honestly when a system has been orphaned by its installer.
Checked and explained on every visit, because power cuts happen.
Power cuts catch people out. Battery backup keeps a gate running for days after the mains fault, so when it finally stops the cause looks unrelated.
Most automation faults we attend in Los Angeles County trace back to something simple: a dirty sensor, a flat remote battery, or a gate that has started to bind and is making the operator work harder than it should.
We would rather fix what you have than sell you something new. Telling a Burbank customer their fence has years left in it is a shorter conversation, but it is the one that gets us called back.
If the structure is sound we repair it. Posts that are still solid, a frame that is still square and hardware that can be replaced usually add up to a repair rather than a rebuild.
Every automated gate has a manual release. We show you where yours is and how to use it, and battery backup will usually cycle the gate a number of times on its own.
Once a year is plenty for most residential gates. Cleaning the photo eyes and checking the hardware prevents most of the callouts we attend.
Nine times out of ten it is a safety sensor — misaligned, dirty or failed. The system is doing exactly what it is designed to do with the information it has.
We cover Burbank and the surrounding communities including Toluca Lake, Universal City and Cahuenga Pass, so we are rarely far away when something needs looking at quickly.
Burbank sits within our regular working area alongside Toluca Lake, Universal City and Cahuenga Pass. Being local matters more than it sounds: it is the difference between coming out this week and coming out next month.
A service call is usually resolved the same visit. A full install depends on the gate and the power route, and we tell you which before we start.
Most automation installs are a day on site, assuming power is already at the gate. Running a new supply or cutting loops into the driveway adds to that.
One crew, one point of contact, and a written price with nothing hidden in it. We clear up properly at the end, which sounds like a small thing until someone does not.
You get a straight answer on the day. If the job needs something we cannot do well, we will tell you that too rather than take it on and hope.
There is no useful phone price for this. What moves the number is the length, the height, the ground conditions and whether there is an old fence or gate to remove. We look, then we put it in writing.
We quote after seeing the property, always. Anyone giving you a firm figure without knowing your ground is guessing, and that guess is rarely in your favour once they arrive.
We release the operator and move the gate by hand first. If it is heavy or binding, the fault is mechanical and no amount of work on the motor will fix it.
Power, sensors, controls and the gate itself all get tested. Guessing at an operator is how people end up paying for a control board they never needed.
Every pin is a city we cover. Tap one to open our electric gate repair page for that city, or see the full list of service areas.
The 20 communities closest to Burbank that we cover. Same crew, same pricing.
(213) 282-7990
Text Us