Looking for Burbank Metal Fence Repair? A damaged fence rarely needs replacing from end to end. We repair what can be repaired and replace only what has to be replaced. We serve Burbank and the surrounding Los Angeles County neighborhoods.
No two jobs in {city} are quite the same. One property needs an hour of adjustment and new hardware; the next has shifted posts, a bent frame and an operator that has been fighting the gate for years.
If the bones are sound, we fix the bones. Full replacement only makes sense when repair would cost more than it is worth.
We work throughout Burbank and the surrounding Los Angeles County communities. We give you the price in writing up front, and we do not start work until you are happy with it.
The bigger the gate, the less forgiving it is. A driveway gate that is a fraction out of square will fight its operator every single cycle.
We square the frame, reset what needs resetting and replace worn running gear, then set the operator to suit the gate as it now sits.
Sliding gates depend on several components working together — tracks, wheels, rollers, guides, brackets, frames, operators and safety equipment. A small alignment problem can make a large gate very hard to move.
If a sliding gate is dragging, making unusual noises, moving unevenly or failing to close properly, it should be inspected before something breaks.
A swing gate that has started catching on the driveway is usually a post problem, not a hinge problem.
We fix the cause at the post, then re-hang and re-align so the leaf swings clear and latches cleanly again.
Automatic gates around Burbank combine a physical gate with mechanical and electrical equipment. When one stops working the problem is not necessarily the gate itself — it may be the operator, motor, controls, sensors, remotes, safety equipment or wiring.
We service gates for apartment buildings, businesses and parking areas across Burbank, where a gate that fails is a problem the same morning.
From a walk gate that no longer latches to a large automatic entrance, we repair gates on Burbank homes and multifamily property alike.
Safety sensors, keypads, remotes, receivers and intercoms all have to agree with each other. We troubleshoot the complete system rather than swapping parts.
Wood gates split, warp and loosen in the Los Angeles County sun. Metal gates develop alignment problems, damaged hardware or failures at welded joints.
The operator opens and closes an automated gate. On a busy Burbank driveway that is hundreds of cycles a month, and they eventually develop mechanical or electrical problems.
Burbank has a wide variety of property types, from older neighborhoods to newly built communities, and gate and fence construction varies just as much. Having one contractor who handles the fence, the gate and the automation means nobody gets to blame the other trade when something does not work.
Payless Fence Repair & Gate Contractor serves customers throughout Burbank and the surrounding communities. Whether you need a damaged gate repaired, an automatic system diagnosed, a fence line restored, or honest advice about whether repair or replacement makes more sense, the objective is the same: a practical solution and workmanship that lasts.
We give you the price in writing up front, and we do not start work until you are happy with it.
Small faults compound in {city}. A gate slightly out of square puts load through the operator, and an operator working too hard fails early and takes the control board with it.
We are a locally owned and operated company serving Burbank and the rest of Los Angeles County. Our technicians are trained, experienced and committed to quality workmanship.
Dependable results and long-lasting repairs you can count on. From quality parts to expert workmanship, we take pride in every job we complete in Burbank.
Most jobs start the same way: we walk the line with you, look at what is already there and find out what is actually failing. On a Burbank property that usually means checking the posts before anything else, because a fence almost always gives up at ground level long before the boards do.
Every run is different. We measure the line, check what the ground is like, look at access for materials, and work out whether the existing posts can stay. That last question decides most of the price.
We quote after seeing the property, always. Anyone giving you a firm figure without knowing your ground is guessing, and that guess is rarely in your favour once they arrive.
Two things surprise people on cost: removal and disposal of what is already there, and ground that turns out to be rock or roots. Both are real labour and both get priced honestly up front.
One crew, one point of contact, and a written price with nothing hidden in it. We clear up properly at the end, which sounds like a small thing until someone does not.
You get a straight answer on the day. If the job needs something we cannot do well, we will tell you that too rather than take it on and hope.
Sun is the quiet killer here. UV breaks the surface down and greys the timber, which is cosmetic at first and structural eventually. Sprinklers are worse: a head throwing onto the boards keeps them permanently damp at the base.
Santa Ana winds do the visible damage. A solid privacy fence is a sail, and all of that load goes into the posts, which is why a footing that seemed fine for years fails in one October night.
Get the material spec in writing, not the brand name. Ask whether the bottom rails are reinforced on long spans, and whether there is ground clearance under the boards.
Ask how deep the post holes are going and how much concrete goes in each one. Ask what fixings they are using. Those two answers tell you whether someone is thinking about year ten or Friday afternoon.
A straightforward residential run is usually a day or two on site once materials are in. Posts go in first and the concrete needs time before anything hangs on them, so the work is not continuous.
Most fence jobs are measured in days rather than weeks. What stretches a schedule is removal of what is already there, difficult access, or ground that fights the digger.
If the structure is sound we repair it. Posts that are still solid, a frame that is still square and hardware that can be replaced usually add up to a repair rather than a rebuild.
We would rather fix what you have than sell you something new. Telling a Burbank customer their fence has years left in it is a shorter conversation, but it is the one that gets us called back.
It depends on the material and, more than anything, on the posts. A properly set fence in good timber or vinyl runs decades here; the same fence on shallow footings starts leaning after a couple of wet winters.
Usually, yes. That is one of the advantages of a fence over a panel system — boards, rails and individual posts can be replaced without touching the rest of the run.
Yes. Removal and disposal is priced as part of the job rather than sprung on you at the end, and it is a real cost when there are concrete footings to break out.
Every pin is a city we cover. Tap one to open our metal fence repair page for that city, or see the full list of service areas.
The 20 communities closest to Burbank that we cover. Same crew, same pricing.
(213) 282-7990
Text Us