Looking for Compton PVC Fence Contractor? We use reinforced bottom rails on long spans, because unsupported vinyl bows under its own weight. We serve Compton and the surrounding neighborhoods.
Vinyl is only as good as the profile and the posts. Two fences that look identical on day one can be years apart by year five.
We use reinforced bottom rails on long spans, because unsupported vinyl bows under its own weight.
Get the spec in writing rather than the brand name. Wall thickness and the UV package are what you are paying for.
The most common vinyl install: full-height panels with no gaps, on posts sized for the span.
Long runs need a reinforced bottom rail. Without one they bow under their own weight within a couple of seasons.
Wall thickness, virgin material and a titanium dioxide UV package are what separate good vinyl from the cheap kind.
They look identical on day one. By the third summer the cheap one has chalked and yellowed, and nothing brings it back.
Vinyl posts carry the whole fence, so footing depth and spacing matter more than the panels between them.
Gate posts take far more than a line post and get sized up accordingly, with reinforcement inside the profile.
Automatic gates around Compton combine a physical gate with mechanical and electrical equipment. When one stops working the problem is not necessarily the gate itself — it may be the operator, motor, controls, sensors, remotes, safety equipment or wiring.
From a walk gate that no longer latches to a large automatic entrance, we repair gates on Compton homes and multifamily property alike.
Wood gates split, warp and loosen in the Los Angeles County sun. Metal gates develop alignment problems, damaged hardware or failures at welded joints.
Safety sensors, keypads, remotes, receivers and intercoms all have to agree with each other. We troubleshoot the complete system rather than swapping parts.
The operator opens and closes an automated gate. On a busy Compton driveway that is hundreds of cycles a month, and they eventually develop mechanical or electrical problems.
We service gates for apartment buildings, businesses and parking areas across Compton, where a gate that fails is a problem the same morning.
Vinyl suits Compton properties where nobody is realistically going to stain a fence every three years.
It costs more on day one and asks almost nothing afterwards, which is the whole trade.
Estimates are free and there is no obligation. If the honest answer is that repair will not last, we will say so.
Wall thickness and grade, not just a brand name.
On any span long enough to need them.
No staining cycle and no boards to replace.
We would rather fix what you have than sell you something new. Telling a Compton customer their fence has years left in it is a shorter conversation, but it is the one that gets us called back.
If the structure is sound we repair it. Posts that are still solid, a frame that is still square and hardware that can be replaced usually add up to a repair rather than a rebuild.
Price comes down to size, material, access and what has to come out first. A straight run on flat ground with a driveway beside it is quick. The same job down a narrow side return with a hedge in the way is not.
There is no useful phone price for this. What moves the number is the length, the height, the ground conditions and whether there is an old fence or gate to remove. We look, then we put it in writing.
Yes. Removal and disposal is priced as part of the job rather than sprung on you at the end, and it is a real cost when there are concrete footings to break out.
It depends on the material and, more than anything, on the posts. A properly set fence in good timber or vinyl runs decades here; the same fence on shallow footings starts leaning after a couple of wet winters.
It varies with the season. Wind and rain months are busier because more people are calling about damage. We give you a realistic date rather than an optimistic one.
Santa Ana winds do the visible damage. A solid privacy fence is a sail, and all of that load goes into the posts, which is why a footing that seemed fine for years fails in one October night.
Sun is the quiet killer here. UV breaks the surface down and greys the timber, which is cosmetic at first and structural eventually. Sprinklers are worse: a head throwing onto the boards keeps them permanently damp at the base.
Get the material spec in writing, not the brand name. Ask whether the bottom rails are reinforced on long spans, and whether there is ground clearance under the boards.
Ask how deep the post holes are going and how much concrete goes in each one. Ask what fixings they are using. Those two answers tell you whether someone is thinking about year ten or Friday afternoon.
A straightforward residential run is usually a day or two on site once materials are in. Posts go in first and the concrete needs time before anything hangs on them, so the work is not continuous.
Most fence jobs are measured in days rather than weeks. What stretches a schedule is removal of what is already there, difficult access, or ground that fights the digger.
The visible part of a fence is the cheap part. What we spend time on in Compton is the posts, the footings and the framing, because those are what decide whether the run is still straight in ten years.
Every run is different. We measure the line, check what the ground is like, look at access for materials, and work out whether the existing posts can stay. That last question decides most of the price.
Compton sits within our regular working area alongside Lynwood, Paramount and South Gate. Being local matters more than it sounds: it is the difference between coming out this week and coming out next month.
We cover Compton and the surrounding communities including Lynwood, Paramount and South Gate, so we are rarely far away when something needs looking at quickly.
Every pin is a city we cover. Tap one to open our pvc fence contractor page for that city, or see the full list of service areas.
The 20 communities closest to Compton that we cover. Same crew, same pricing.
(213) 282-7990
Text Us