Looking for Tujunga Driveway Gate Repair? A driveway gate that has started catching or dragging has usually been moving for months before anyone noticed. We serve Tujunga and the surrounding neighborhoods.
A driveway gate that has started catching or dragging has usually been moving for months before anyone noticed.
We release the operator and move the gate by hand first, because that tells us whether the fault is mechanical or electrical.
Track, rollers, hinges, posts and footings all get checked together. A gate this size will not stay fixed if only one of them is right.
A slider does not jump its track without a reason: debris, a worn roller or a footing that has settled.
Lifting it back on takes ten minutes. Finding why it came off is what stops it happening again next month.
Rollers are consumable. They flatten, seize and break up, and a gate on failing rollers runs noisy and slow before it runs off.
If your gate has been getting louder over the last few months, it was telling you this was coming.
Reversing into a gate is more common than people admit, and the damage travels past where the car touched.
We check the frame for square, then the hinges, the post and the operator mounting before quoting anything.
Automatic gates around Tujunga combine a physical gate with mechanical and electrical equipment. When one stops working the problem is not necessarily the gate itself — it may be the operator, motor, controls, sensors, remotes, safety equipment or wiring.
From a walk gate that no longer latches to a large automatic entrance, we repair gates on Tujunga homes and multifamily property alike.
Wood gates split, warp and loosen in the the San Fernando Valley sun. Metal gates develop alignment problems, damaged hardware or failures at welded joints.
The operator opens and closes an automated gate. On a busy Tujunga driveway that is hundreds of cycles a month, and they eventually develop mechanical or electrical problems.
Safety sensors, keypads, remotes, receivers and intercoms all have to agree with each other. We troubleshoot the complete system rather than swapping parts.
We service gates for apartment buildings, businesses and parking areas across Tujunga, where a gate that fails is a problem the same morning.
Grit, leaves and the mulch that washes out of a bed after rain all end up in a Tujunga gate track.
Most of the slider callouts we attend start there, and a brush along the track once a month prevents them.
You get a written price before any work begins, and we tell you plainly if replacement is the better value.
We find why it failed so the same repair is not needed twice.
Most track, roller and hardware work is done on the day.
If the gate has reached the end we say so rather than selling a fourth repair.
Replacement makes sense when several posts have gone along the same run, when the frame has racked out of square, or when repeated repairs have already cost more than half the price of new. Short of that, repair almost always wins.
We would rather fix what you have than sell you something new. Telling a Tujunga customer their fence has years left in it is a shorter conversation, but it is the one that gets us called back.
A repair is often the same visit. A new gate takes longer because it is built to your opening, and the posts need to be set and cured before it hangs.
Repairs are usually one visit. Fabrication work depends on the gate, and we will give you a realistic date rather than an optimistic one.
For a gate that will not close or lock we try to get there the same or next day. It is a security problem, not just an inconvenience.
Yes, if the gate moves freely and the posts are up to it. Tell us at the design stage and we will build it automation-ready, which costs very little now and saves a rebuild later.
Almost always the post has moved, dropping the far edge of the leaf so the latch and keeper no longer line up. Replacing hardware on a post that has tilted buys you about a month.
A gate is a moving assembly, so we look at it moving. Hinges, rollers, tracks, latch alignment and the post itself all get checked before anyone quotes a part.
The first thing we check on a Tujunga callout is whether the leaf is still square and whether the post has moved. Almost everything else follows from those two answers.
You get a straight answer on the day. If the job needs something we cannot do well, we will tell you that too rather than take it on and hope.
We come out and look, we tell you what we found, and you get the price in writing before anything starts. If we think replacement is better value than repair, we say so.
Find out whether the gate is being built to match what is already there, and how close it will actually get. Honest answers about that are a good sign.
Ask what the hinges are rated for against the actual weight of the leaf, and how deep the gate post is going. Undersized on either is why gates start dragging.
Heat, damp and grit are what wear a gate out. Tracks fill with debris, hinges dry out, and the ground under the posts moves enough through the year to change how the gate sits.
Wind is the one that breaks things. A closed gate takes the full force of it, and that load ends up in two hinges and one post.
Price comes down to size, material, access and what has to come out first. A straight run on flat ground with a driveway beside it is quick. The same job down a narrow side return with a hedge in the way is not.
We quote after seeing the property, always. Anyone giving you a firm figure without knowing your ground is guessing, and that guess is rarely in your favour once they arrive.
Every pin is a city we cover. Tap one to open our driveway gate repair page for that city, or see the full list of service areas.
The 20 communities closest to Tujunga that we cover. Same crew, same pricing.
(213) 282-7990
Text Us