Looking for Tujunga Electric Gate Contractor? Safety equipment, force settings and a manual release you know how to use are part of the job, not extras. We serve Tujunga and the surrounding neighborhoods.
An automated gate is a gate plus equipment, and the equipment only works as well as the gate underneath it.
We size the operator to the actual leaf weight and duty cycle rather than fitting whatever is on the shelf.
Safety equipment, force settings and a manual release you know how to use are part of the job, not extras.
Sized to the actual leaf weight and how often the gate will cycle, not to whatever is in the van.
A residential unit on a commercial entrance does a year of domestic work every month, and it fails accordingly.
Keypads, intercoms, remotes and app control each solve a different problem. Most households need more than remotes.
An exit loop cut into the driveway is the upgrade people add later and wish they had first.
Photo eyes cover the opening, edge sensors cover the gate itself, and force settings stop it pushing through resistance.
We fit them, demonstrate them working, and show you where the manual release is.
Automatic gates around Tujunga combine a physical gate with mechanical and electrical equipment. When one stops working the problem is not necessarily the gate itself — it may be the operator, motor, controls, sensors, remotes, safety equipment or wiring.
From a walk gate that no longer latches to a large automatic entrance, we repair gates on Tujunga homes and multifamily property alike.
Wood gates split, warp and loosen in the the San Fernando Valley sun. Metal gates develop alignment problems, damaged hardware or failures at welded joints.
The operator opens and closes an automated gate. On a busy Tujunga driveway that is hundreds of cycles a month, and they eventually develop mechanical or electrical problems.
We service gates for apartment buildings, businesses and parking areas across Tujunga, where a gate that fails is a problem the same morning.
Safety sensors, keypads, remotes, receivers and intercoms all have to agree with each other. We troubleshoot the complete system rather than swapping parts.
Power at the gate is the question that decides most automation projects in Tujunga: trenching a long drive is often the largest single cost.
Solar is genuinely viable here for gates with modest daily cycles, and it removes that question entirely.
We explain what we found, what it will cost, and what we would do if it were our own property.
Operator matched to leaf weight and duty cycle.
Sensors fitted, forces set, and both demonstrated to you.
Established equipment we can still get parts for in ten years.
A service call is usually resolved the same visit. A full install depends on the gate and the power route, and we tell you which before we start.
Most automation installs are a day on site, assuming power is already at the gate. Running a new supply or cutting loops into the driveway adds to that.
We release the operator and move the gate by hand first. If it is heavy or binding, the fault is mechanical and no amount of work on the motor will fix it.
Automation callouts in Tujunga split roughly into three: something mechanical, something electrical, or a safety sensor doing exactly what it should. We work out which before touching anything.
Every automated gate has a manual release. We show you where yours is and how to use it, and battery backup will usually cycle the gate a number of times on its own.
It has to move freely by hand and the posts have to take the load. We check both before quoting rather than bolting a motor onto a problem.
Once a year is plenty for most residential gates. Cleaning the photo eyes and checking the hardware prevents most of the callouts we attend.
We cover Tujunga and the surrounding communities including Sunland, Shadow Hills and Burbank, so we are rarely far away when something needs looking at quickly.
Tujunga sits within our regular working area alongside Sunland, Shadow Hills and Burbank. Being local matters more than it sounds: it is the difference between coming out this week and coming out next month.
Ask where the manual release is and how it works in a power cut. If they cannot answer that on the spot, keep looking.
Ask what safety equipment is included and whether they will demonstrate it working. Photo eyes and correct force settings are not extras.
Sun, damp and dust are hard on the equipment. Photo eyes collect cobwebs and grime, enclosures cook in the afternoon heat, and control boards do not enjoy either.
Most automation faults we attend in San Fernando Valley trace back to something simple: a dirty sensor, a flat remote battery, or a gate that has started to bind and is making the operator work harder than it should.
There is no useful phone price for this. What moves the number is the length, the height, the ground conditions and whether there is an old fence or gate to remove. We look, then we put it in writing.
Two things surprise people on cost: removal and disposal of what is already there, and ground that turns out to be rock or roots. Both are real labour and both get priced honestly up front.
You get a straight answer on the day. If the job needs something we cannot do well, we will tell you that too rather than take it on and hope.
One crew, one point of contact, and a written price with nothing hidden in it. We clear up properly at the end, which sounds like a small thing until someone does not.
Every pin is a city we cover. Tap one to open our electric gate contractor page for that city, or see the full list of service areas.
The 20 communities closest to Tujunga that we cover. Same crew, same pricing.
(213) 282-7990
Text Us